The orientation of the washing machine is confirmed in the design of the toilet. When the water pipe is installed, the water outlet will be reserved in the corresponding direction. After connecting with the water inlet pipe of the washing machine, it can be used normally. Washing machine faucet device is not complex, but there are some local attention, the following to introduce the washing machine faucet device process.

Connection of washing machine faucet and water outlet

1. The faucet of washing machine is special-purpose, which is different from the general faucet in appearance. There is a long connecting nozzle under it, which connects with the water inlet pipe of washing machine. Before installation, all the accessories of the faucet should be taken out, and a box of raw material belt should be prepared. The raw material belt is used between the water outlet and the faucet to prevent water leakage during operation.

2. First put the faucet on the faucet of the filter screen device equipped with the faucet, and then put the sealing rubber ring on the port. Use the raw material belt to wrap the connection port of the faucet for several circles. At this time, it should be circled clockwise. When connecting the faucet and the water outlet, it will be tightened clockwise, so that the connection will be more flexible. When connecting the faucet and the outlet pipe of the wall, attention should be paid to the installation of the shielding cover, which can cover the gap at the joint.

The faucet of washing machine is connected with the water inlet of washing machine

1. The special faucet of washing machine should be connected with the water inlet of washing machine. The water inlet pipe of washing machine should be taken out. There is a slider at one end of the connection between the water inlet pipe and the water tap. When connecting, press the slider first to separate the buckle of the joint from the water inlet pipe, and then loosen the four screws on the water inlet pipe joint, and then put the connector into the faucet. There is a rubber washer inside the joint of the water inlet pipe, which should be tightly attached to the faucet, and then use a screwdriver to tighten the four screws on the port.

2. Connect the other end of the water inlet pipe of the washing machine with the water inlet behind the washing machine. Just align the water outlet at the other end with the water inlet of the washing machine, and then tighten the plastic nut on the water pipe end to finish the device.

3. After the connection is completed, turn on the tap water switch to check whether there is water leakage at each joint. After confirming that there is no problem, turn on the washing machine to let the washing machine work, and check whether the water inlet of the water inlet pipe is normal.

Height of washing machine faucet

The device height of the washing machine faucet has been confirmed when the waterway transformation is carried out, which is generally about 1.1 meters. It can be used to various types of washing machines. Generally, the height of the faucet should not be lower than the height of the washing machine, and the workers will arrange the height specifically when the waterway is reconstructed.

The process of washing machine faucet device is not complicated, only need to do a good job in the connection of the two ends, we should pay attention to the purchase of faucets must choose washing machine special faucets.

The article comes from the water tap http://www.kpsengle.com